 |
|
Moving Iron Ammeter-Voltmeter |
|
|
|
·DESCRIPTION
Moving-iron meters are intended for measuring AC current or AC voltage. These meters measure the RMS value and their indications are highly independent of the measured value curve shape.
|
|
 |
|
Moving Coil Ammeter-Voltmeter |
|
|
|
·DESCRIPTION
Moving-coil meters are intended for measuring DC current or DC voltage. These meters can also be used for measuring AC voltages and AC currents as long as rectifier built in.
|
|
 |
|
Bimeter+Moving Iron |
|
|
|
·DESCRIPTION
The bimetallic movement responds and indicates the meanRMS current loading over a specified period of time. A black pointer which is attached to the mimetal spiral moves in response to the current(heating) in the bimetal spiral. A red pointer (slave or
memory pointerr) is driven by the black pointer. The red pointer remains at its maximum position to which the black pointer has reached during any period of time. Further, when the loading is reduced, the red pointer remains at the maximum value. This
enables the operator to know the maximum loading of the system without continuously watching the meter. A zero corrector is provided on the front of the meter to bring back the red pointer to the position of the black pointer. A sealing/locking facility is also provided on the zero corrector to prevent tampering of the reading at the red pointer.
|
|
 |
|
Chang-Over Switch Meter |
|
|
|
·DESCRIPTION
Moving-iron panel Ammeter with a change-over switch is adapted for measuring AC Ampere in 3 phase 3 wire system and 3 phase 4 wire system. A three-positional switches installed on the meter frontal side enables the choice of the measured voltage in different points of the network system.
|
|
 |
|
Frequency Meter |
|
|
|
·DESCRIPTION
Frequency meter is the instrument, whichmeasures the frequency. Frequency meter shows the number of the cycles in 1 second. Frequencymeters are connected parallel to circuit which frequency will be measured like voltmeters.
|
|
 |
|
Power Factory Meter |
|
|
|
·DESCRIPTION
Power factor meters are destined of measuring of the phase angle between the current and voltage in single-phase AC power network. These meters are calibrated to correspond to the cosing of the anglei, e. the power factor.
|
|
 |
|
Power Meter |
|
|
|
·DESCRIPTION
Power meter is a moving - coil meter with a built-in measuring transducer. It is destined to measure active or reactive power in AC power networks. The measured power is indicated by a magnetoelecteic(moving-coil)measuring system. |
|
 |
|
Synchroscope Meter |
|
|
|
·DESCRIPTION
Synchroscope meter for phase comparison for single phase or three phase |
|
 |
|
Phase Sequence Meter |
|
|
|
·DESCRIPTION
Phase sequence mete is designed for easy testing of phase sequence in three-phase systems with a permissible operating voltage up to 500V. For short connections, not longer than 5 minutes or 15minutes for one test, a push-button switch is placed on the front plate. Adisc with an indicating arrow rotates in the direction of the arrow, if the three phases are properly connected, otherwise the disc rotates in the other direction. By changing of two wires, the phase sequence will be corrected to corresponding designation of the terminals. |
|
 |
|
Long Scale Meter |
|
|
|
 |
|
Dual CT operated AC Ammeter |
|
|
|
 |
|
Dual Direct Input AC Voltmeter |
|
|
|
 |
|
Round Meter |
|
|
|
 |
|
Square Meter |
|
|
|
 |
|
Din Rail Meter |
|
|
|
·DESCRIPTION
DIN rail meters are adapted for a fast assembly |
|
 |
|
Hour Meter |
|
|
|
·DESCRIPTION
Elapsed time meter monitor ON/OFF time of plant and equipment allowing the user to perform functions such as Production Efficiency Cost Estimating and Service Period monitor-ink for prevent-atives maintenance etc. the time is measured in instrument of 0.01hrs up to 99999.99 hrs after which time the |
|
|
|
TOP Current Transformer Manufacturer- Since 1998
